Plastic extruded automatic oil compression casting mold temperature controller for XPS board

Plastic extruded automatic oil compression casting mold temperature controller Temperature 20C to 250C PLC/PID controll

Plastic extruded automatic oil compression casting mold temperature controller for XPS board

1.This Mold Temperature Controller has been designed to maintain at a constant temperature the mould cavities, the hydraulic oil of the injection moulding machines, the extruder screws, the calibration heads, the cylinders and calenders of thermoforming lines. Water, oil and pressurized water models operate in a wide range of temperatures, form 20°C up to 250°C.

Model		XP-MTC9PS	XP-MTC12PS	XP-MTC24PS
Medium		High Temperature Heat Conduction Oil
Temperature		Max. 160°C/250°C
Over Heat Protection Set Temp		170°C/270°C
Control Method		PLC/PID Control,Micro Computer Control
Heated Capacity(KW)		9	12	24
Pump	Motor Capacity(KW)	0.75	1.1	2.2
	Max. Pressure(Kpa)	335	400	420
	Max. Fflow(Lr/min)	100	120	200
Expansion Tank	Full Capacity(Lr)	12	15	30
	Usage Amount (Lr)	25	30	60
Cooling Capacity(Kcal)	Indirect Cooling Method
Cooling Valve Flow Coefficient (CV Value)		0.54	0.80	0.85
Pipe Diam	Circulation System	10Ax2x 25A	10Ax4 32A	20A
	Cooling System	10A
Power Source		AC 380V/50Hz 3P+E(5m)
Dimension  L x W x H		1080x350x850	1080x350x850	1180x450x850
Weight(Kg)		80	90	100

2.  Mold Temperature Controller applications:

A] Geared up for high-precision molding.  Monitors temperature with 0.1°C accuracy and 0.5°C precision.  Provides measuring range of 0.1%-1% digit.  Attains 0.25sec of sampling cycle.  New control algorithm to reduce transient overshoot.

B] Machine maintenance made easier.  XP series (non-contact relay) of heater control circuit to achieve more than 10 years of lifetime.  4P pump to offer a longer lifetime.  Corrosion-resistant piping system to prevent rusting and scaling.

C] Reduces heater on time by 8%.  *120 degree setting when using water  Higher control precision to improve operational efficiency.  Heater pump sizes optimized for better performance and less energy consumption.(Heat exchange effectiveness, which depends on the mold size in use, is not necessarily maximized by heater pump capacities. Bigger heater pump consume more electric power, and may increase utility costs.)

D] Automated control offers safer operational environment.  Non-fuse breaker with open-circuit voltage capability to secure safe operation environment.  XP series for heater control to achieve more than 10 years of lifetime(compared to contactor's average lifetime of 1 year).

Packaging Detail:	1. Wooden cases 2. Wooden pallets 3. As request (if fumigation needed)
Delivery Detail:	15 working days after deposit

Plastic extruded automatic oil compression casting mold temperature controller for XPS board